產品參數/ Product parameter
您方便與快速！
三合一夾頭，具備三爪夾頭、夾具王套筒夾頭、反張?zhí)淄矈A頭，三位一體。更換不同夾頭，不需要將原三爪夾頭從機械卸下，你將因此可以采用各種有利的夾持方式，因為它們?nèi)勘辉O(shè)計在一體了。
當需要做反張夾持時，采用反張模塊式夾頭，可以快速換模，精密正確內孔夾持。
你將驚喜于此系統的精密夾持工件，同心度將低于0.005 mm 。藉由centrex ( 桑德瑞斯系統) 將反張模塊夾頭正確的定位在原夾頭主體上，因此，可以擴大拉長與競爭對手在效率上的較勁，當他還正忙著更換夾頭。你已經
輕松地正進行生產加工。
真正的革新是可以將套筒式夾具王系統也安裝到比托普夾頭上，這正是客戶所期待與盼望的系統，正確而簡單。您曾有過如此的方便與快速嗎！
目前，以B-Top3-215 可以具三合一功能，配合SP65 通孔夾頭與曼多反張模塊夾頭( size0 ～ 4)，外徑大通孔62mm，內徑反張范圍13mm ～ 150mm
B-TOP的相關數據：
●夾持力90KN ( 近似9,000kg )
●轉速，每分6,000rpm
●通孔徑62mm
●可達夾爪行程7.4mm
●一套直齒的主爪、板手、法蘭、保護爪與反張夾頭、套筒夾頭的連接界面
FLEXIBILITY THANKS TO THE MODULAR SYSTEM
I.D., O.D. or jaw clamping – it's easy with the B-Top3 modular system. Everything fits together. With the MANDO Adapt segmented mandrel, you can change to perfect I.D. clamping in less than 2 minutes. The SPANNTOP adaptation is the right partner if you have reached your holding power and accuracy limits for O.D clamping. And all without removing the chuck!
Basic clamping for small lot
The B-Top3 basic clamping device also has its advantages: The fast jaw change with single-jaw unlocking mechanism and high repeatability is ideal for small lot sizes. Thus, in most cases machining the chuck jaw to size is unnecessary.
Flexibility with system
Also the insert bushing system is configured for small lot sizes and maximum flexibility. It enables clamping devices to be conveniently adapted to your requirement: Closed with ejector, spray nozzles, or with variable end-stop. Just the way you need it.
Better clamping force
And the new innovative lubricating system ensures improved clamping force behavior of the wedge bar principle.
You have never turned like this before.
Key advantages
●Extremely fast conversion [2 min.] to I.D. clamping with the MANDO Adapt mandrel-in-clamping-device or to O.D. clamping with the SPANNTOP Adapt chuck
●Through-bore passage bushings or end-stop bushings that can be changed from the front
●Fast jaw change with individual unlocking at high change-over accuracy and suitable for the ?Reishauer? system, straight gear cutting
●High degree of operator safety with minimum change-over time
●Proven wedge rod mechanism
三合一夾頭，具備三爪夾頭、夾具王套筒夾頭、反張?zhí)淄矈A頭，三位一體。更換不同夾頭，不需要將原三爪夾頭從機械卸下，你將因此可以采用各種有利的夾持方式，因為它們?nèi)勘辉O(shè)計在一體了。
當需要做反張夾持時，采用反張模塊式夾頭，可以快速換模，精密正確內孔夾持。
你將驚喜于此系統的精密夾持工件，同心度將低于0.005 mm 。藉由centrex ( 桑德瑞斯系統) 將反張模塊夾頭正確的定位在原夾頭主體上，因此，可以擴大拉長與競爭對手在效率上的較勁，當他還正忙著更換夾頭。你已經
輕松地正進行生產加工。
真正的革新是可以將套筒式夾具王系統也安裝到比托普夾頭上，這正是客戶所期待與盼望的系統，正確而簡單。您曾有過如此的方便與快速嗎！
目前，以B-Top3-215 可以具三合一功能，配合SP65 通孔夾頭與曼多反張模塊夾頭( size0 ～ 4)，外徑大通孔62mm，內徑反張范圍13mm ～ 150mm
B-TOP的相關數據：
●夾持力90KN ( 近似9,000kg )
●轉速，每分6,000rpm
●通孔徑62mm
●可達夾爪行程7.4mm
●一套直齒的主爪、板手、法蘭、保護爪與反張夾頭、套筒夾頭的連接界面
FLEXIBILITY THANKS TO THE MODULAR SYSTEM
I.D., O.D. or jaw clamping – it's easy with the B-Top3 modular system. Everything fits together. With the MANDO Adapt segmented mandrel, you can change to perfect I.D. clamping in less than 2 minutes. The SPANNTOP adaptation is the right partner if you have reached your holding power and accuracy limits for O.D clamping. And all without removing the chuck!
Basic clamping for small lot
The B-Top3 basic clamping device also has its advantages: The fast jaw change with single-jaw unlocking mechanism and high repeatability is ideal for small lot sizes. Thus, in most cases machining the chuck jaw to size is unnecessary.
Flexibility with system
Also the insert bushing system is configured for small lot sizes and maximum flexibility. It enables clamping devices to be conveniently adapted to your requirement: Closed with ejector, spray nozzles, or with variable end-stop. Just the way you need it.
Better clamping force
And the new innovative lubricating system ensures improved clamping force behavior of the wedge bar principle.
You have never turned like this before.
Key advantages
●Extremely fast conversion [2 min.] to I.D. clamping with the MANDO Adapt mandrel-in-clamping-device or to O.D. clamping with the SPANNTOP Adapt chuck
●Through-bore passage bushings or end-stop bushings that can be changed from the front
●Fast jaw change with individual unlocking at high change-over accuracy and suitable for the ?Reishauer? system, straight gear cutting
●High degree of operator safety with minimum change-over time
●Proven wedge rod mechanism
